I have updated the various signal build instructions and they can be found in the Links section to the right.
It is advisable to download and read the "Australian Made Brass Signal Assembly Instructions" document first as it contains a list of extra items (wire, screws, etc.) that will be required to build the signals and some advice on where to find them online.
I haven't uploaded the various 3D STL print files as yet but I have yet to do the text that will be needed on the various items descriptive download page.
The 3D STL print files are for the various bases/mechanisms that the brass signal is mounted in, along with other wire handrail and operating rod bending jigs and some jigs for mounting the handrails on the signal.
These STL files will be made available on my page on my page on Thingiverse, a 3D file online 'library'.
Links to these items will be placed on this blog.
The STL files will be free to download but there is a 'Tip the Designer' button if you feel so inclined.
For information on ordering signal castings and availability, please contact John Dersch in the Ordering Signals section to the right.
Regards,
Ray Pilgrim
No comments:
Post a Comment