An order for the Signals Branch locally made lost wax cast brass signals with this new linear servo base or the original screw adjustable signal arm throw base/mechanism either as a kit or built can be made by email to: rpilgrim@bigpond.net.au
 |
| Original Screw Adjustable Signal Arm Base/Mechanism |
A double mount has also been designed and tested successfully for two-arm signals such as brackets.
Although not designed and tested as yet a three-arm signal base should be possible but will require more below baseboard vertical clearance.
As there are no built-in throw controls on the signal base for the movement of the signal arm (as on the Signals Branch versions with the cranks and adjustable screws) the movement of the signal arm is controlled by a servo driver board.
The servos will need to be driven by a servo driver board such as those supplied by Tam Valley and other companies. I believe that Arduino boards can be used but that is outside my area of knowledge.
The linear servo is fitted with a plug that matches the Tam Valley servo driver boards.
The linear servo can be sourced online with a different plug for those not using the Tam Valley servo driver boards.
Tam Valley makes servo driver boards for both DCC and DC.
DCC - TamValley Singlet and Quad servo driver boards with DCC accessory decoder(s).
DC - Tam Valley Octopus III 8 servo driver board.
Signals Branch has no affiliation with Tam Valley just a user of their products.
The advantage of these 'built-in' linear servos is that there would be no need to get under the layout to install them with all signal arm throw programming being able to be done on the workbench.
It is expected that the base with a single linear servo would be approximately $17.50 each and a double base with two servos would be approximately $29.95.
Unfortunately, these linear servos are not cheap like the 9G servos.
The linear servo signal bases will be available without the linear servo as well.
A base for a single linear servo is $8.50.
A base for 2 linear servos will be $11.95.
At this stage, the linear servos will not be available separately.
I currently have approximately 20 linear servos available for inclusion in kits or built signals with another 20 in transit but not expected for several weeks.
